Cracked Plate in Compression

Started by Mark Barkey, May 02, 2017, 01:42:28 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Mark Barkey

May 02, 2017, 01:42:28 AM Last Edit: May 02, 2017, 01:47:56 AM by Mark Barkey
Cracked Plate in Compression

http://forums.mbarkey.com/index.php?action=downloads;sa=view;down=24

Here is an image attached that shows a that -1 MPa was applied to the model and all the stresses are nearly -1 MPa in the y-direction.
Print
Go Up Pages1
User actions